Cayer BV30 Heavy Duty Video Tripod, 64 inches Professional Aluminum Tripod Leg with K3 Fluid Head, Mid-Level Spreader, Max Loading 13.2 LB, 360 Degree Fluid Head for DSLR Camcorder Camera. This video tripod system includes fluid head drag video head with 2-stage tripod and carry bag, features a fluid head with a wide platform to support both camcorders and DSLR cameras, and a 75mm half ball for quick leveling without adjusting the legs.The video head supports a maximum weight load of 13.2 pounds, features a tilt range of -70°/+90° and provides a panning rotation of 360°. The drag head also provides fixed counter balance, pan, and tilt drag. The Easy Link connector is a 3/8-16 threaded hole in the side of the head that allows you to easily mount accessories to the fluid head itself, and not the camera. This heavy duty tripod kit provides 2 sliding quick release plates interchangeable with 501PL plates. Each plate features both a 1/4"-20 and 3/8"-16 camera tie-down screws and has a sliding range of +20/-20mm to enable travel capabilities essential in balancing uneven configurations. This 2-stage fluid head tripod legs are constructed out of oval aluminum tubes for strength and durability, features a built-in 75mm bowl, allows you to adjust the height of the tripod from 32" to 64"; mid-level spreader provides enhanced stability by holding the tripod legs in locked position. 1 x heavy duty fluid head tripod, 2 x quick release plates, 2 x hex keys, 1 x carrying bag, 1 x user manual.
The Cayer BV30 Professional Tripod System includes the BV30 Aluminum Tripod and K3a Fluid Head with Carrying Bag. Capable of supporting up to 13.2 lb, the BV30 provides a professional tripod system solution.
K3a Video Head - Weighs 2.5 pounds, supporting up to 13.2 lb - Separate pan and tilt lock levers, a built-in bubble level indicator - Fixed counter balance, pan, and tilt drag, +90°/-70° tilt angle, 360° panning - One interchangeable Pan Bar for right and left-handed operators via the two rosettes on either side of the head - Two universal quick release plates, with ±20mm sliding range, a 1/4"-20 Screw and a Spare 3/8"-16 Screw - Tightened with a 75mm half-ball mount, integrated flat base with 3/8"-16 thread in the center, able to be secured to flat-mount accessories such as sliders, jibs, and more without unwieldy bowl adapters BV30 Tripod Leg - Built-in 75mm bowl - 2-stage 3-section leg design allows you to adjust the height of the tripod from 32" to 64" - Mid-level spreader provides enhanced stability by holding the tripod legs in locked position - Supports payloads of up to 88lb, even larger video heads or heavy dollies and sliders can be supported by the tripod itself Specificaions: Material: Aluminum Alloy Tilt range: -70° to +90° Pan range: 360° Friction Control: Fixed QR Plate Length: 4.33" / 110 mm Mounting Platform: 1/4" ; spare 3/8" screws Diameter (bowl):3" / 75mm Sections: 3 Fold Length: 32" / 810 mm Max. Operating Height: 64 / 1625 mm Min. Operating Height: 32 / 810 mm Loading Capacity: 13.2 lbs / 6 kg Weight: 8.5 lbs / 3.85 kg Packing List: 1 x BV30 Tripod Leg 1 x K3 Fluid Head 1 x 75mm Half Ball Adapter 1 x Head Lock Handle 1 x Extra QR Plate (2 pcs in total) 2 x Hex Keys 1 x Carrying Bag.
Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. This item is in the category "Cameras & Photo\Tripods & Supports\Tripods & Monopods".
The seller is "jinab-26" and is located in this country: US. This item can be shipped to United States.