Comica BoomX-D 2.4G Wireless Microphone System Real-time Audio Dual Transmitter. The EACHSHOT 10' Century C Stand Kit is a worthy carrier of the time honored C Stand tradition of secure and powerful light and modifier supports for cinema and still studios. The C Stand kit features a 10', two tier spring loaded riser column with a baby pin on top, removable turtle self locking base legs, 2 aluminum 3.0" grip heads and a 40" extension boom arm. The stand base features a specially designed sure locking mechanism that is unique to the C Stand series. Each leg firmly sets to a preset lock position for easy swing setup and then flat for compact storage and transport.
Individual legs can be swung to any angle, breaking out of fixed leg stance of classic stands. The'Turtle Base' provides an exceptionally low center of gravity, balancing off axis gear without tipping the assembly, especially when secured with saddlebag style sandbags.The unique staggered curved leg design allows C Stands to be nested allowing for several to be used in close proximity. The lower leg can also be slid under many objects. The kit's extension gobo rod arm precisely slips into the aluminum 3.0 grip heads, supporting light modifiers, arms, scrims, cantilever flags, gobos or smaller lights, into exact position. The 5/8 diameter arm and Grip/Gobo/KnuckleHead combination can be used as a short boom, is tremendously helpful on still life sets, supporting everything from reflectors to soup spoons in clamps. The cast aluminum head design has interlocking facing surfaces to keep a fixed position when supporting accessories on the steel arm in one of its four 3/4", 5/8", 3/8", and 1/8" diameter channels.
The jaws open to a maximum of 1-1/8 to hold rods, dowels and studs. The channel disks pivot about the center tightening handle and is grooved to friction hold firmly.
When used atop light stands, it attaches via a 5/8" baby pin receiver hole with a choice of two places on the length for the tightening grip handle, taking best advantage of shorter studs on standard light stands or the included 5.5" longer baby pin ends on Century Stands. Altogether, the C Stand stands alone in the wish list of absolute'must-haves' for your studio. Qliq Qwip The name'Century Stand' goes back to the days of motion picture production. There were no artificial light sources. No large tungsten lamps and certainly not quartz bulbs to illuminate.
Just light from the sun. The film sets would revolve on platforms to assure a constant light from the sun above. Carefully positioned giant reflectors would be strategically placed to deflect the sunlight up onto the stages and thereby illuminate the scene and actors. While the reflectors were made in many sizes and shapes, the most popular was the 100 inch, or'century', sized reflector. Stage assistant then created tools to aid them in the support of these 100 reflectors and invented what we now call C Stands.
The first C Stands could not adjust or swivel, but they easily nested together just as they do today. Time tested and proven as an invaluable stage property, today's Century Stands, or C Stands, are an essential element in the image maker's inventory of tools. FEATURES Legs swing lock into preset and custom positions Durable chrome finished steel withstands harsh conditions. Spring loaded buffer on each riser section with rubber gaskets Stagger height'Turtle Legs' allow for close nesting stands Two Aluminum Gobo/Grip/Knuckle Heads with 4 channels for total dexterity Sure locking legs fold flat for storage and transport Baby Pin stud for angular mounts.
Specifications: Minimum Height: 53" (134 cm) Maximum Height: 10.8' (330 cm) Arm Length: 128 cm / 50 inches Closed Length: 47" (119 cm) Footprint Diameter: 34" (86 cm) average radius Maximum Load: 30 lbs (13.6 kg) as a stand Leg Heights: 7" / 9" /10.5" Attachment Size: 2.75" 5/8"diam (16 mm) male'baby pin' stud Base Insert Diameter: 1-3/16 Wheels: No Weight Kit: 18.25 lbs (8.3 kg) Stand alone: 14.75 lb (6.7 kg) Arm: 1 lb 3.5 oz (0.55 kg) Grip/Knuckle Head, each: 1 lb 2 oz. 51 kg Baby Pin Stud: 6.6 oz (186g) Materials Stand and Arm: Stainless Steel with Chrome Finish Grips: Cast Aluminum. Package Including: 1 x Center Stand (Turtle Base + Main Central Column) 1 x 128cm Boom Arm 2 x Grip Head. Equipped with double threaded ports, 1/4 and 3/8 threaded ports. It can be directly connected to photographic equipment such as flash, camera, gimbal, etc, with a wide range of use.
3 legs open and close, the center of gravity stable support strong. Good load bearing and seismic performance. Uniform firmness, in line with equipment requirements. Separable three-legged design for quick folding. Flexible for a variety of scenarios.The 4 different size holes design of the round handle clamp makes it easier to lock the holding arm and other accessories. It is suitable for connecting more size holding arm and accessories, and the operation is simple. High-quality sponge handle, comfortable hand feeling, and beautiful design.
It can also play a non-slip effect when you move. ECheque will be held until cleared. We will not be responsible for item loss because of wrong or undeliverable address. All items are located in the United States. Our office hour: -9:00a.
(GMT+8) of Monday to Friday -And our company is closed on Weekend and Public Holiday (China) We apologize for the late reply during the holidays! But hope that our customers give us their understanding.
There are one year warrenty for all the items. If you received the item with defective or faulty, we will responsible for it once we confirmed the problem. For small items, we can replace it for you directly once we received the picture about defective. If you used it for several months and found it is defective, you can return it to repair. If you return directly without contacting us, it maybe return to you, we will not responsible for that.
Support For any questions Please feel free to cotnact us. You have the right to cancel your order. Goods will only be accepted for return if they are received back to us within this time, unless we have notified you otherwise.
The item "US Professional Heavy Duty Studio C-Stand with Gobo Arm Grip Heads Century Stand" is in sale since Monday, January 18, 2021. This item is in the category "Cameras & Photo\Lighting & Studio\Light Stands & Booms".
The seller is "photo-gadgets" and is located in Chino, California. This item can be shipped to United States.